联志2u r2165p服务器远程关机了怎么开？我有一个航天联志的服务器，服务器上有RAID，只有一张硬盘，重装系统的时候提示找不到硬盘

本文目录

• 联志2u r2165p服务器远程关机了怎么开
• 我有一个航天联志的服务器，服务器上有RAID，只有一张硬盘，重装系统的时候提示找不到硬盘
• DataGuard数据库服务器硬盘故障处理
• 航天联志服务器管理口密码
• 请举出你所了解的服务器品牌
• 无盘网络系统的服务器配置
• 航天联志服务器RAID驱动无法安装

联志2u r2165p服务器远程关机了怎么开

服务器默认都带BMC，这个用来做管理的网口,远程关机，其实BMC还在工作，使用ipmitool登录服务器管理端口即可实现开机，关机。

下面是ipmitool的一些实用实用命令，假设服务器BMC里设的IP地址是 192.168.188.167，用户是root，密码是password
查看电源状态：
ipmitool -I lan -U root -P password -H 192.168.188.167 power status
开机：
ipmitool -I lan -U root -P password -H 192.168.188.167 power on
关机：
ipmitool -I lan -U root -P password -H 192.168.188.167 power off

我有一个航天联志的服务器，服务器上有RAID，只有一张硬盘，重装系统的时候提示找不到硬盘

只有一块硬盘而且可以启动，那么你做的不是RAID0就是RAID1了，因为不论你做0+1还是5都不可能只用一个硬盘就能启动的，那么在这样的情况下，可以进系统的话，你先把数据给弄出来，如果数据不重要可以不要数据。
启动的时候先进RAID卡配 把RAID信息给清掉。然后设置不要从RAID启动。再看看~

DataGuard数据库服务器硬盘故障处理

　　昨天一台PC Server上的数据库又出问题 同样是硬盘故障

　　这两台服务器用的都是联志的国产低端PC Server 这些服务器的质量实在是差 上次一台备机的硬盘损坏 然后又有一台因为电源模块的问题反复重起 现在这一台服务器的硬盘再次出现问题

Nov : : wap kernel: attempt to access beyond end of deviceNov : : wap kernel: : : rw= want= limit= Nov : : wap kernel: EXT fs error (device sd( )): ext _readdir:  directory # contains a hole at offset Nov : : wap kernel: attempt to access beyond end of deviceNov : : wap kernel: : : rw= want= limit= Nov : : wap kernel: EXT fs error (device sd( )): ext _readdir:  directory # contains a hole at offset Nov : : wap kernel: attempt to access beyond end of deviceNov : : wap kernel: : : rw= want= limit= Nov : : wap kernel: EXT fs error (device sd( )): ext _readdir:  directory # contains a hole at offset Nov : : wap kernel: attempt to access beyond end of deviceNov : : wap kernel: : : rw= want= limit= Nov : : wap kernel: EXT fs error (device sd( )): ext _readdir:  directory # contains a hole at offset

　　好在数据库通过DataGuard可以切换到另外一台 没有数据损失

Thu Nov : : ARC : Complete FAL archive (thread sequence destination bmark *** )ARC : Begin FAL archive (thread sequence destination bmark *** )Creating archive destination LOG_ARCHIVE_DEST_ : bmark *** ARC : Complete FAL archive (thread sequence destination bmark *** )ARC : Begin FAL archive (thread sequence destination bmark *** )Creating archive destination LOG_ARCHIVE_DEST_ : bmark *** Thu Nov : : ARC : Complete FAL archive (thread sequence destination bmark *** )ARC : Begin FAL archive (thread sequence destination bmark *** )Creating archive destination LOG_ARCHIVE_DEST_ : bmark *** Thu Nov : : ARC : Complete FAL archive (thread sequence destination bmark *** )Thu Nov : : ARC : Complete FAL archive (thread sequence destination bmark *** )

　　现在是主库所在的服务器出现问题:

　　SQL》 select dbid name PROTECTION_MODE DATABASE_ROLE SWITCHOVER_STATUS from v$database;

　　DBID NAME      PROTECTION_MODE      DATABASE_ROLE    SWITCHOVER_STATUS BMARK     MAXIMUM PERFORMANCE  PRIMARY          SESSIONS ACTIVE

　　备库现在一切正常:

　　SQL》 select dbid name PROTECTION_MODE DATABASE_ROLE SWITCHOVER_STATUS from v$database;

　　DBID NAME      PROTECTION_MODE      DATABASE_ROLE    SWITCHOVER_STATUS BMARK     MAXIMUM PERFORMANCE  PHYSICAL STANDBY SESSIONS ACTIVE

　　现在需要的是一点停机时间进行切换

Fri Nov : : alter database mit to switchover to physical standby with session shutdownFri Nov : : ALTER DATABASE MIT TO SWITCHOVER TO PHYSICAL STANDBYFri Nov : : SMON: disabling tx recoveryFri Nov : : Active process user oracle program ora (CJQ ) Active process user oracle program ora (TNS V V ) Active process user oracle program ora (TNS V V ) Active process user oracle program ora (TNS V V ) Active process user oracle program ora (TNS V V ) Active process user oracle program ora (TNS V V ) Active process user oracle program ora (TNS V V ) CLOSE: waiting for server sessions to plete Fri Nov : : CLOSE: all sessions shutdown successfully Fri Nov : : SMON: disabling cache recoveryFri Nov : : Shutting down archive processesArchiving is disabledFri Nov : : ARCH shutting downFri Nov : : ARCH shutting downFri Nov : : ARC : Archival stoppedFri Nov : : ARC : Archival stoppedFri Nov : : Thread closed at log sequence Successful close of redo thread Fri Nov : : ARCH: noswitch archival of thread sequence ARCH: End Of Redo archival of thread sequence ARCH: Evaluating archive log thread sequence ARCH: Beginning to archive log thread sequence Creating archive destination LOG_ARCHIVE_DEST_ : bmark *** Creating archive destination LOG_ARCHIVE_DEST_ : /var/oradata/arch/ _ arc ARCH: Completed archiving log thread sequence ARCH: archiving is disabled due to current logfile archivalClearing standby activation ID ( xd dd cc )The primary database controlfile was created using the MAXLOGFILES clause The resulting standby controlfile will not have enoughavailable logfile entries to support an adequate numberof standby redo logfiles Consider re creating theprimary controlfile using MAXLOGFILES (or larger) Use the following SQL mands on the standby database to createstandby redo logfiles that match the primary database:ALTER DATABASE ADD STANDBY LOGFILE srl f SIZE ;ALTER DATABASE ADD STANDBY LOGFILE srl f SIZE ;ALTER DATABASE ADD STANDBY LOGFILE srl f SIZE ;ALTER DATABASE ADD STANDBY LOGFILE srl f SIZE ;Archivelog for thread sequence required for standby recoveryMRP started with pid= MRP : Background Managed Standby Recovery process startedMedia Recovery Log /var/oradata/arch/ _ arcIdentified end of REDO for thread sequence Identified end of REDO for thread sequence Media Recovery End Of Redo indicator encounteredMedia Recovery Applied until change MRP : Media Recovery Complete: End Of REDOResetting standby activation ID ( xd dd cc )MRP : Background Media Recovery process shutdownFri Nov : : Switchover: Complete Database shutdown requiredCompleted: alter database mit to switchover to physical stFri Nov : : Shutting down instance: further logons disabledShutting down instance (immediate)License high water mark = Fri Nov : : ALTER DATABASE CLOSE NORMALORA signalled during: ALTER DATABASE CLOSE NORMAL ARCH: Archiving is disabledShutting down archive processesArchiving is disabledArchive process shutdown avoided: activeARCH: Archiving is disabledShutting down archive processesArchiving is disabledArchive process shutdown avoided: activeFri Nov : : Starting ORACLE instance (normal)LICENSE_MAX_SESSION = LICENSE_SESSIONS_WARNING = SCN scheme Using log_archive_dest parameter default valueLICENSE_MAX_USERS = SYS auditing is disabledStarting up ORACLE RDBMS Version: System parameters with non default values:processes = timed_statistics = TRUEshared_pool_size = large_pool_size = standby_archive_dest = /var/oradata/archfal_server = bmark *** fal_client = bmarklog_archive_format = %t_%s arc CJQ started with pid= Fri Nov : : ARCH: STARTING ARCH PROCESSESARC started with pid= ARC : Archival startedARC started with pid= Fri Nov : : ARCH: STARTING ARCH PROCESSES PLETEFri Nov : : ARC : Archival startedFri Nov : : ARC : Thread not mountedFri Nov : : ARC : Thread not mountedFri Nov : : alter database mount standby databaseFri Nov : : Successful mount of redo thread with mount id Fri Nov : : Standby Database mounted Completed: alter database mount standby databaseFri Nov : : ALTER DATABASE RECOVER managed standby database disconnect Attempt to start background Managed Standby Recovery processMRP started with pid= MRP : Background Managed Standby Recovery process startedFri Nov : : Completed: ALTER DATABASE RECOVER managed standby database dFri Nov : : Media Recovery Waiting for thread seq# Media Recovery Log /var/oradata/arch/ _ arcMedia Recovery Waiting for thread seq# Media Recovery Log /var/oradata/arch/ _ arcMedia Recovery Waiting for thread seq#

　　看来以后不能再采购联志服务器了

lishixinzhi/Article/program/Oracle/201311/18377

航天联志服务器管理口密码

HP管理口：ILO
默认用户/密码：Administrator/password
HP以前管理口登陆MP卡
通过网线连接MP卡的RJ-45口，通过telnet方式登录，默认用户/密码：Admin/Admin
DELL服务器管理口：idac
默认账号：root 密码：calvin
IP：192.168.0.120
IBM管理口：IMM
RD系列lenovo/len0vO
默认地址：192.168.70.125
默认用户/密码：USERID/PASSW0RD
联想服务器管理口

请举出你所了解的服务器品牌

品牌大全
IBM(IBM) 康柏(COMPAQ) 惠普(HP) 宏_(acer)
浪潮(Langchao) 联想(lenovo) 戴尔(DELL) 方正(FOUNDER)
英特尔(Intel) 清华同方(TSINGHUA TONGFANG) 实达(START) 苹果(Apple)
NEC(日电) 越海扬波(Intel海啸) 华为3COM(huawei-3com) 海信(hisense)
华硕(ASUS) 曙光(DAWNING) 长城(Great Wall) 网新易得 (网新易得 )
超微(Supermicro) 航天联志(Aisino) 五舟(WUZHOU) 大恒(DAHENG)
桑达(SED) 可为(可为) SGI(SGI) 山顿(SENDON)
CDPOWER(CDPOWER) 航天宇星(SPACESTAR) ZOT(ZOT) 微星(MSI)
宝德 (PowerLeader) 太阳(Sun) 金品(金品) 友讯(D-Link)
金博士(JINBOSHI) 智翔(智翔) 联志(CPRO)
亿万克是研祥高科技控股集团旗下全资子公司。研祥集团作为中国企业500强，持续运营30年。研祥集团全球49个分支机构，三个国家级创新平台，一直致力于技术创新引领行业发展，拥有超1100项授权专利，超1300项非专利核心技术。
【感兴趣请点击此处，了解一下。 】

无盘网络系统的服务器配置

带机量在100台左右的配置:
CPU:Intel Xeon 5504 四核
主板 华硕 P5BV/SAS服务器主板
内存 金士顿 4G ECC
硬盘 希捷 146G(SAS/16M/盒装) *3
显卡 集成
网卡 双千兆
机箱 联志 4165服务器机箱
电源 台达 DPS-600MBZ

航天联志服务器RAID驱动无法安装

启动的时候先进RAID卡配 把RAID信息给清掉。然后设置不要从RAID启动。再看看~ 安装系统时找不到硬盘，应该是你没有加载RAID卡驱动的问题，找一下对应